System information

50
System Settings
Tempest
Distortion Source: Project, Beat, Pot Position—Each Beat has its own unique
distortion setting but there is also a single distortion setting for the Project. If
you wish to use the Beat’s setting (and have the distortion amount change when
a different Beat is selected), set this to Beat (factory default). If you wish to
use the Project’s distortion setting (so that the distortion amount stays the same
regardless of which Beat is playing), choose Project. If you wish the distortion
settingtoalwaysreectthepositionoftheDistortionknob,choosePotPosition.
Saving a Beat with Distortion Source set to Beat saves the Beat with the current
distortion setting. Saving a Project with Distortion Source set to Project saves the
Project with the current distortion setting.
Calibrate Analog Oscillators and Filters: Tempest’s analog waveshapes and
ltersarecalibratedatthefactoryandshouldnotneedtoberecalibratedunless
you are experiencing problems.
Calibrate Slider 1 and 2 Position: Tempest’s Sliders are calibrated at the
factory and should not need to be recalibrated unless you are experiencing prob-
lems.
Reset System Parameters: Resets all the system parameters to their default
values.
Show System Information: Displays the current versions of the operating
systems.