Specifications

When MultiMode is On, the Prophet ’08 responds to MIDI data on two
consecutive MIDI channels, the base channel (selected in the Gobal menu) and
the next highest channel. The base channel controls voices 1 through 4 and the
other channel controls voices 5 through 8. Notes, program changes, and other
MIDI data received on the specified channels provide independent control of the
two parts.
Note that a program change needs to be sent to each of the two channels when
setting up MultiMode. Only Layer A of the selected program is loaded. There
are no stacks or splits in MultiMode. Use CCs or Layer A NRPNs for
automation of parameters. Program Layer B data is completely ignored in
MultiMode.
Page 13:
Copy Bkx P: xxx x
To Bkx P: xxx x
Program Copy Utility – Enables Layer A or B of a Program to be copied to
Layer A or B of the same or a different Program. The top line displays the
current Bank and Program. Use PARAM 1 to choose the Layer (A or B) to be
copied. Use PARAM 2 to choose the destination Bank, Program, and Layer.
Press W
RITE to execute.
Page 14:
Dump (Hit Write)
xxxxxxxxxxxxxxxx
MIDI Dumps: see table – Allows dumping of Programs in SysEx format via
MIDI. Use PARAM 2 to select from the following options.
Display MIDI Transmit Operation
Current Program
Send current program
Current Bank
Send all 128 programs in current bank
All Banks
Send all programs in both banks
When this page is active, the WRITE switch will blink. Press the switch to start
transmission. This feature is handy for saving Programs on a computer in SysEx
format, or for sending them to another Prophet '08 via a direct MIDI connection.
The dumps include Program and Bank numbers, so when received, the programs
will be stored in the same location.
12