System information

ManualsBrandsDave Smith Instruments ManualsMusical equipmentProphet 12

68 System Settings

Dave Smith Instruments

System: UI Preferences

1. Touch Slider Latch Mode:

Active Only, All— When set to Active Only

(the default) and latCh on is active, the latched slider value is reset to 0 when

switching between FX1 and FX3, playing another pad, or switching between 16

SoundS and 16 BeatS modes. FX2 and FX4 behave similarly.

When set to All and

latCh on is active, the slider values stay latched for a given

Sound, even when switching among FX1, FX2, FX3, and FX4, playing other

pads/Sounds, or switching between 16 SoundS and 16 BeatS. Turning latch off

resets all latched values to 0.

For details about the touch sliders, see “Real Time FX” on page 35.

2. Latch Button behavior:

Normal, Shift Switched, Disabled—

In Normal

mode, the touch slider remains at the last value when

latCh on is active.

witched mode, the un-shifted and shifted behaviors are swapped. That

is, the

latCh on buttons now switch between FX1 and FX3 or FX2 and FX4.

Shift + latCh on turns latch on and off.

When set to Disabled, the

latCh on buttons simply switch between FX1 and

FX3 or FX2 and FX4 and the latch function is disabled.

For more details about

latCh on, see “Real Time FX” on page 35.

3. Envelope Amount Encoder behavior:

Normal, Shift Switched—

Shift Switched mode, the un-shifted (aMount) and shifted (veloCity aMount)

behaviors are swapped. That is, when Shift is off, the encoder controls veloCity

Mount and when on, aMount.

4. Select Sound behavior:

Shift On + Pad, Shift Held + Pad—

The default

behavior is Shift Held + Pad. To select a Sound for editing without playing the

Sound, hold Shift down and press the desired pad. When set to Shift Held + Pad,

the pads can still be played when Shift is on.

When set to Shift On + Pad,

Shift must either be on or held down to select the

Sound.

5. Tap Tempo behavior:

Shift On + Play, Shift Held + Play—

With

Tempest’s default behavior (Shift Held + Play), must be held to tap the tempo.

Otherwise, Play starts/restarts the Beat, whether Shift is on or not. When set to

Shift On + Play, Play is used to tap the tempo when

Shift is either on or held

down.