User guide

6.1! Program Menu
In addition to bringing up this screen, when you are in Program mode, and additional Menu item
called Program also appears in the menu bar. This menu contains the following commands:
Edit Program
This command will just assure that the Editor has the correct program loaded
Write Program
Whatever program is currently selected, stock or edited, can be saved back on top of itself or
to a different location.
This screen will appear where you can select any location of any bank to to store this sound. This is
one way of reordering patches, but perhaps not the most efficient way. More on that later.
Two things: Care must be taken to not overwrite Programs you may need. Also, understand that this
is writing this Program and location to the Tetra memory, not simply to a place in the software.
Receive Bank
The hierarchal menu drops down to give you the choice of Bank, A, B. C. D or all all Banks. This
transfers all the Banks from the Tetra into the software.
Tetra SoundEditor User Guide Page 29