Install Instructions

• Once the motor has slowed to a stop, press and hold the

Menu button and Enter button for ~

5 seconds. The display will change to show your current set pressure, see figure 7.9;

• If the controls are untouched for ~ 30 seconds, the menu will revert back to normal display;

• Using the

Menu up button and

Menu down button scroll through to TYPE;

• Use the

Menu up button and

Menu down button to change the setting from

SINGLE to MASTER;

• Press the

Enter button to save settings and return to the HOME SCREEN;

• Repeat this process with the other pump in the system, selecting SLAVE;

• Now restart automatic operation by pressing

Automatic on / manual off button.