Manual

10 3
IMPORTANT NOTICE
FACTORS THAT WILL IMPROVE THE PERFORMANCE & LIFE
OF YOUR SALT WATER BROMINATOR
PLEASE READ THIS BEFORE OPERATING YOUR BROMINATOR
There are THREE main factors that will damage your Brominator and reduce the life of the product.
Please monitor the following factors in accordance with your installation & operating instructions.
1. MAINTAIN OPTIMUM SALT LEVELS:
OPTIMUM SALT LEVEL: 2500ppm
• RunBrominatorattheSaltLevelsstatedwithinthisdocumenttoensure
optimum sanitizer output and cell life.
• Operatingthisdeviceatlowsaltlevelswilldamagethecellandreduceitslife.
• ThecontrolpaneldisplaysredLEDindicatorwarningswhenthesaltlevelsare
low.
• Ifnoactionistakentorectifythesaltlevels,damagetothecellmayresult
which will not be covered under warranty.
2. MONITOR & MAINTAIN YOUR BROMINATOR CELL:
• TokeepyoursaltwaterBrominatorinthebestpossiblecondition,regular
monitoring of the electrolytic cell is recommended. The ‘Cell’ is the clear
plastic housing located in the plumbing.
• DuringtheBrominationprocessawhitepowderyCalciumscalemaynaturally
build up on the titanium plates in the cell. Monitor the cell to prevent excessive
scale build up. Excessive scale build up will cause
 damagetoyourcell,anddramaticallyreduceitsefciencyandlifespan.
• ReversePolaritymodelsarelowmaintenancemodelsthatminimisescale
build up.
• IfCalciumscaledoesbuilduppleasecleanthecell,followingthecleaning
instructions provided on page 6.
• NEVER: Use concentrated acid to clean your cell.
• NEVER: Leave cell in cleaning solution for extended periods of time
• NEVER:Usemetalimplements,scourersorbrushestocleanyourcell
3. BALANCED POOL WATER CHEMISTRY:
• SaltlevelsMUSTbemaintainedat3000ppmforoptimumperformanceand
lifespan
• CalciumHardnesslevelsMUST be kept to ideal ranges of 200-275ppm (for
Concrete and Tiled Pools) and 100-225ppm (for other surfaces) to prevent
excessive scale build up and damage to equipment
• pHlevelsMUST be kept to ideal levels to prevent damage to equipment and
pool surfaces and to obtain optimum sanitizer effectiveness (Refer to page 5).
• TotalAlkalinitymustalsobekeptinanidealrange(Refertopage5).
NOTES