Manual

There are other factors that can cause the Unit not to work correctly:

1. Heavy Rain-cancauseverydilutedpoolwatertopassovertheCellduetosurfaceskimming.

2. Scaled Cell-ascaledCellwillnotdrawasmuchelectricalcurrentasacleanCellwhenrststarted.

3. Cold Water-coldpoolwaterreducestheabilityofaCelltocarryelectricalcurrent.(ReferWinterModebelow).

4. Failing Cell-

as the Cell ages there will come a time when the electrical current draw will drop. This can be

compensated for with the addition of extra salt. A Cell is considered failed when it draws less than 80 % of maximum

current. To keep a failed Cell in operation Winter Mode can be used along with extra salt. There will come a time when

the Cell will not respond to either extra salt or Winter Mode. It will then need to be replaced (see pg11 for replacement

cell codes). Please note that the Low Salinity Indicator is not like T.D.S. meters, which are temperature compensated

ScienticInstruments.Theaccuracywillbewithin500ppmsalinityandtheyarewatertemperaturedependent,justas

the Cell is.

WINTER MODE:

When the Cell draws electrical current from the Power Supply, the amount of current drawn is dependent upon a

number of factors. Two of these factors are Salinity and Water Temperature.

The Low Salinity Indicators on your ChloroMatic

are designed to operate at swimming season water

temperatures.Whenthepoolbeginstocoolintheoff-seasonthetemperaturedropcausestheCelltobehave

differently-itwilldrawlesselectricalcurrent.ThiscancausetheLowSalinityIndicatortoassumethatthesalinity

has fallen even if the salinity has remained relatively constant.

When the temperature of the pool water drops, the Winter Mode Switch should be placed in the ON position.

The Winter Mode Indicator will then be ON. This has two effects:

1. It alters the setting of the Low Salinity Indicator.

2. It reduces the Cell Output by approximately 15%

The Unit will now respond to a cold pool environment. Winter Mode should not be used in the swimming

season as it reduces the Cell Output, leading to less sanitiser, and it alters the setting of the Low Salinity

Indicator, which could lead to premature Cell failure.

AUTOMATIC TIME CLOCK OPERATION:

YourChloroMaticsaltwaterchlorinatoristtedwithoneoftwotypesofautomatictimer

(1) Digital

(2) Analogue

(1) Models with Digital Timer:

ThedigitaltimerincludesabacklitLiquidCrystalDisplaywhichdisplaystimeofdayin12-HourformatwithAM/

PM indication and a selector switch position indicator. The digital timer has up and down buttons for incremental

settings.

Timer Setting and Functions:

To set your clock and various functions please refer to the table of instructions following.

NOTE:

Whenyourstturnonthepowertothechlorinator,itwilltakeapproximately5secondsfortheLCDtoappearon

the screen.