PoolSweepa Wallclima / Optima Pool Cleaners Operating Instructions 8151634
PoolSweepa Wallclima / Optima Pool Cleaners Operating Instructions Contents 1. INTRODUCTION.................................................................................. 2 2. SPECIFICATIONS................................................................................. 2 3. WARNINGS AND CAUTIONS............................................................. 2 3.1. Warnings..................................................................................... 2 3.2. Cautions................................
PoolSweepa Wallclima / Optima Pool Cleaners Operating Instructions 1. INTRODUCTION Thank you for purchasing a PoolSweepa Robotic Pool Cleaner. We are sure that your PoolSweepa Robotic Pool Cleaner will provide you with reliable, convenient and cost effective pool cleaning. Its reliable filtration in all pool conditions and all-surface climbing brush enhance maximum pool hygiene. The Robotic Pool Cleaners by PoolSweepa deliver advanced cleaning technology, long lasting performance and easy maintenance. 2.
4. POOL CLEANER PARTS Robot Pool Cleaner Model WallClima Robot Pool Cleaner Model Optima Remote Control Unit Brushes PVC Brush For concrete, PVC, fiberglass and liner. Power supply unit Optional Wonder (foam) Brush For smooth ceramic tiles. PVC Brush For concrete, PVC, fiberglass and liner. Optional Wonder (foam) Brush For smooth ceramic tiles.
5. USING THE POOL CLEANER 5.1. Set Up Before using the Pool Cleaner for the first time perform the following steps. Unwind the cable and stretch it out completely so that it has no kinks. Remove the plastic coverings before use. 40°C Max 104°F Max GFI/ELI Position the power supply so that it is approximately in the middle of the long side of the pool at a distance of 3 m.
5.2. Putting the Pool Cleaner into the pool If the foam Wonder brush is dry soak it in water until soft. Shake the robot from side to side or turn it upside down to release trapped air. Let it sink to the pool floor. ON Turn the power supply ON. 5.3. Removing the Pool Cleaner from the pool The robot will perform automatic shut-off at the end of the cleaning cycle. OFF Turn off and unplug the power supply.
B C Using the floating cable, bring the pool cleaner to the pool’s edge. To ensure longevity of your pool cleaner, it is recommended that the pool cleaner is removed from the pool when not in use, especially at times when superchlorination is performed. Do not pull the Pool cleaner from the pool using the cable. 5.4. Maintenance lean the filter bag with a hose. C Periodically clean the brushes with a hose.It is recommended to periodically wash the filter bag in a washing machine.
Cleaning the impeller Unplug the power supply. If you notice debris trapped in the impeller open the impeller and remove the debris. 1 1 A 2 2 B Cable To remove the kinks, stretch the cable out completely and let it sit for at least a day in the sun. 5.5.
6. REMOTE CONTROL UNIT - FOR OPTIMA MODEL The Control Panel The remote control unit (RCU) offers two operation modes – Automatic mode and manual direction control mode. In automatic mode, the cleaning parameters can be changed. In manual direction mode, the robot’s motion can be controlled manually.
Press the Manual / Automatic select button and then choose the desired parameters according to the following table: Cleaning cycle indicator This determines the length of the cleaning cycle. Fast 4-hour cycle Efficient 6-hour cycle for everyday use. (Default setting) Extra 8-hour cycle Delay time indicator This determines when the pool cleaner starts to work. Delaying allows the dirt to settle to the bottom of the pool.
7. POWER SUPPLY - FOR OPTIMA MODEL Digital “Switch-Mode” Power Supply with Weekly Timer and full Filter Bag indicator. • • • • • Input – 100-250 AC Volts 50-60 Hertz 180 Watt Output – <30 VDC IP 54 ON / Off switch Full Filter Bag Indicator LED 1 LED 2 LED 3 Full filter bag indicator and Reset button The power supply is equipped with a filter bag status indicator. The red LED indicates two filter conditions. • When blinking - The filter is partially blocked.
8.
5 6 3 3 2 1 8mm (5/16”) 2 1 8 7 4 4 9 12 10 PoolSweepa Wallclima / Optima Pool Cleaners | Operating Instructions
Davey® Repair or Replacement Guarantee In the unlikely event in Australia or New Zealand that this Davey product develops any malfunction within three years of the date of original purchase due to faulty materials or manufacture, Davey will at our option repair or replace it for you free of charge, subject to the conditions below. Should you experience any difficulties with your Davey product, we suggest in the first instance that you contact the Davey Dealer from which you purchased the Davey product.
PoolSweepa Wallclima / Optima Pool Cleaners Davey Water Products Pty Ltd Member of the GUD Group ABN 18 066 327 517 AUSTRALIA Davey Support Centre 6 Lakeview Drive, Scoresby, Australia 3179 Ph: 1300 367 866 Fax: 1300 369 119 Website: davey.com.au ® Davey is a registered trademark of Davey Water Products Pty Ltd. © Davey Water Products Pty Ltd 2013. NEW ZEALAND Davey Support Centre 7 Rockridge Avenue, Penrose, Auckland 1061 Ph: 0800 654 333 Fax: 09 527 7654 Website: daveynz.co.