User guide

POOLSWEEPA Wallclima / Optima Pool Cleaners | Operating Instructions
9
Press the Manual / Automatic select button and then choose the desired parameters according to the
following table:
Cleaning cycle
indicator
This determines the
length of the cleaning
cycle.
Fast
4-hour cycle
Efficient
6-hour cycle for
everyday use.
(Default setting)
Extra
8-hour cycle
Delay time indicator
This determines when
the pool cleaner starts
to work. Delaying allows
the dirt to settle to the
bottom of the pool.
Immediate start
(Default setting)
One-hour delay Two-hour delay
Cleaning action
indicator
Allowing you to choose
from the following
options.
Standard
Floor and wall
cleaning.
(Default setting)
Ultra-clean
Stronger suction
and slower
movement.
(floor and wall)
Floor only
Cleans only the
floor and the area
where the floor and
walls meet
Walls only
Cleans walls and
waterline only
Note:
•After 2 minute if no button is pressed, the Remote Control Unit will shut-down and the Pool cleaner
will continue to work in the previous settings.
•When the "Ultra-Clean" and "Walls Only" options finish their cycles, the Pool Cleaner will return
to default settings.