Manual

10
PUMP INSIDE TANK Option - Close up
TO TOILETS
AND/OR
LAUNDRY
(do not mix/cross-connect
with mains water supply)
MAINS
WATER SUPPLY
3/4" BSP
male thread
Manual start button
RAINWATER SUPPLY
from discharge of auto submersible rainwater pump
Power to pump via 3 pin socket - plug the rainwater pump in here.
Incoming power
to RainBank
®
via 3 pin plug
3/4" BSP
male thread
1" BSP
male
thread
* Pressure Limiting Valve
WHERE MAINS PRESSURE
EXCEEDS 900kPa. A PLV*
MUST BE FITTED TO INLET!
Stop valve
200 Micron ‘Y’ Strainer
Pipe
WARNING: DO NOT INSTALL CHECK VALVES BETWEEN PUMP AND RAINBANK
®
.
IMPORTANT: ALL PIPEWORK AND OUTLET FITTINGS FROM RAINBANK
®
MUST BE LABELLED TO AS3500. DO NOT CONNECT WITH CRIMPED FITTINGS.