User's Manual

13 WWW.DAVIDCLARK.COM
David Clark Company aviation headsets are covered by a 5-year warranty.
In the unlikely event that you experience a problem, David Clark Company
qualified representatives are available to answer your questions and provide the
best customer service in the industry. Many repairs are covered under warranty.
Contact Customer Service:
Tel. [phone]
508-751-5800 (outside the USA)
Visit our website at www.davidclark.com
Customer Service and Support
A C C E S S O R I E S / C U S T O M E R S E R V I C E
Replacable Parts Removal/Installation
M-55 Microphone (P/N 09168P-66)
•To remove microphone: Pull off foam cover and pull
microphone firmly and pull straight out.
•To install microphone: Align keyway on microphone with
keyway on boom. “TALK” should be inward towards the
user’s face. Push until microphone snaps into place.
Microphone Foam Cover (P/N 40062G-05)
•Slide foam cover over top of microphone and secure
with ‘O’ ring (included).
Leatherette Ear Seals, Pair (P/N 15976P-07)
•To remove: Gently pull off.
•To install : Stretch ear seal over lip of dome to seal
Outlast
®
Fabric Vented Head Pad (P/N 15977P-04)
•To remove: Gently pull off.
•To install : Align head pad with headband assembly and
push to attach hook-and-loop around the perimeter
Control Module Mounting Clip (P/N 41068G-03)
•PlaceControlModuleintomountingclipandsnapinplace.
•UsecliptoattachControlModuletoapparelorany
convenient spot within the aircraft.