Item# 4401 Brook 4-in-1 Convertible crib Lit de bébé 4 en 1 Brook revised 08APR2019 Assembly Instructions Manuel d’assemblage 1
Thank you for purchasing a DaVinci nursery product! To ensure safe use of your product, please follow these assembly instructions closely. If you are missing parts or have any questions, please visit our website at www.davincibaby.com/support. For assembly, use the Allen wrench if it is included in the hardware box. We also recommend using a Phillips head screwdriver (not included) to complete assembly. Please do not substitute parts or use power screwdrivers. Our pieces are made from natural woods.
PARTS • PIÈCES Not to Scale/Pas à l'échelle A. Footboard A. Pied de lit B-2. Headboard B-2. Tête de lit E-1. Rear Left Leg E-1. Pied arrière gauche F-1. Rear Right Leg F-1. Pied arrière droit C. Left side panel C. Panneau latéral gauche D. Right side panel D. Panneau latéral droit H. Mattress Support III H. Support du matelas III G. Toddler Bed Conversion Kit G. Conversion de lit pour tout-petit I. Headboard Top Bar I.
H3. 1-3/4” Allen Head Bolt (4) H3. Boulon Allen de 4,4 cm (1-3/4 po) (4) H7. Lock washer (16) H7. Rondelle de blocage (16) H4. 1” Allen head bolt (4) H4. Boulon Allen de 2,5 cm (1 po) (4) H8. Wood Dowel (2) H8. Goujon de bois (2) H10. 1-3/4” Allen Head Bolt (3) H10. Boulon Allen de 4,4 cm (1-3/4 po) (3) H5. Barrel Nuts (8) H5. Les noix dex baril (8) H9. Allen wrench H9. Clé hexagonale H12. Cam Lock (3) H12. Verrou de came (3) H6. Washer (4) H6. Rondelle (4) H11. Lock washer (3) H11.
3 Please use an Allen wrench to screw the bolt with the lock washer straight into the threaded nut until it is tight. À l’aide d’un clef Allen, vissez la vis avec une rondelle de blocage dans la partie filetée de l’écrou et serrez. * The bolt may not be able to screw through the barrel nuts smoothly. It is suggested to use a flat screwdriver to stabilize and adjust the direction of the barrel nut.
2 H5 I (back) H7 H1 H8 (arrière) H7 H5 H1 H5 H1 H7 E-1 H8 B-2 H5 H1 H7 H1 H8 H7 H5 F-1 X2 X4 3 H2 J H7 F-1 I H5 H2 H2 H7 H7 H5 H2 H5 H7 J H5 E-1 B-2 X4 H2 H7 D H5 J C Do not overtighten the bolts. Ne pas trop serrer les boulons.
4 C H D H6 H7 * Make sure the mattress support III (H) is installed properly. THE FLAT SIDE UP. * Make sure the smattress support III (H) is level. * S’assurer que le support du matelas III (H) est bien installé LE CÔTÉ PLAT VERS LE HAUT. * S’assurer que le support du matelas III (H) est de niveau. H4 ! 0-1 yrs old 0-1 ans H6 H7 H4 X4 1-2 yrs old 1-2 ans Do not overtighten the bolts. Ne pas trop serrer les boulons.
5 A H7 C H3 H7 H3 H7 H7 H3 H3 H7 X4 Do not overtighten the bolts. Ne pas trop serrer les boulons. H3 (back) (arrière) D KEEP THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE. Recheck all screws and bolts to be sure they are fastened securely. Do not overtighten. Before using your crib, please read all cautionary statements on the insert sheet. GARDER CE MANUEL EN LIEU SÛR POUR UN USAGE ULTÉRIEUR.
CAUTION: ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27 1/4 INCHES (69CM) BY 51 5/8 INCHES (131CM) WITH A THICKNESS NOT EXCEEDING 6 INCHES (15CM). Please refer to the label (sample below) on the inside face of the headboard. Record the model/ item number and serial number of your crib, the name of the store where you made the purchase, the date of purchase and the wood finish in the box to the lower right. WE WILL ASK YOU FOR YOUR SERIAL NUMBER FOR ALL WARRANTY AND REPLACEMENT PART REQUESTS.
WARNING: Failure to follow these warnings and the assembly instructions could result in serious injury or death. READ ALL INSTRUCTIONS BEFORE ASSEMBLING CRIB. KEEP THE MANUAL FOR FUTURE USE. WARNING: Parents should ensure a safe environment for the child by checking regularly, before placing the child in the product, that every component is properly and securely in place. • DO NOT use this crib if you cannot exactly follow the accompanying instructions. • Infants can suffocate on soft bedding.
AVERTISSEMENT : Le non respect des avertissements et directives d’assemblage peut entraîner de graves blessures ou la mort. LIRE TOUTES LES INSTRUCTIONS AVANT D’ASSEMBLER LE LIT. CONSERVER CE MANUEL POUR UN USAGE ULTÉRIEUR. AVERTISSEMENT : Avant de placer l’enfant dans ce lit, les parents doivent s’assurer que son environnement est sécuritaire en vérifiant régulièrement que toutes les composantes sont correctement fixées.
ONE YEAR LIMITED WARRANTY: We will replace any missing parts at the time of purchase or any defective item within a one year period from the date of original purchase. Please keep your receipt so that we may process your warranty request. This warranty only covers new units with original packaging and ownership, and is not transferable. It does not cover any used, secondhand or demo models.
Item# 4401 Brook 4-in-1 Convertible crib Lit de bébé 4 en 1 Brook Toddler Bed Conversion Assembly Conversion en lit pour tout-petit * All of the parts and hardware you will need are supplied with the crib at the time of purchase. * Les pièces et accessoires de montage dont vous aurez besoin sont fournis avec le lit lors de l’achat. * Keep the footboard for full size bed conversion. * Garder le pied de lit pour la conversion en lit simple.
ASSEMBLY INSTRUCTIONS • INSTRUCTIONS D’ASSEMBLAGE 1 C H7 H3 X4 A D 2 ! C H * Make sure the mattress support III (H) locates at the lowest level. * Assurez-vous que le support de matelas III (H) se trouve au niveau le plus bas.
3 C X3 H11 H10 G D 4 Finish Terminé Do not overtighten the bolts. Ne pas trop serrer les boulons.
TO AVOID DANGEROUS GAPS, ANY MATTRESS USED IN THIS BED SHALL BE A FULL-SIZE CRIB MATTRESS AT LEAST 51 5⁄8 IN. (1310 MM) IN LENGTH, 27 1⁄4 IN. (690 MM) IN WIDTH, AND A MAX THICKNESS OF 6 IN. (150 MM). POUR ÉVITER TOUT ÉCART DANGEREUX, LE MATELAS UTILISÉ DANS CE LIT DOIT ÊTRE UN MATELAS PLEINE TAILLE D’AU MOINS 1310 MM (51 5/8 PO) DE LONGUEUR, 690 MM (27 1/4 PO) DE LARGUEUR ET D’UNE ÉPAISSEUR MAXIMALE DE 150 MM (6 PO).
Item# 5789 Full Size Conversion Kit Traverses de conversion (5789 - Sold Separately) (5789 - vendues séparément) This crib is convertible to a full size bed. M5789 Full Size Conversion Rail is recommended, please contact your retailer or purchase on www.davincibaby.com Ce lit peut être converti en lit simple. Il est recommandé d'utiliser les traverses de conversion M5789. Veuillez contacter votre détaillant ou les acheter sur www.davincibaby.
Registering your product is even easier than before. You can register your product on our website at : www.davincibaby.com/registrations IF YOU WOULD LIKE TO ORDER REPLACEMENT OR MISSING PARTS PLEASE VISIT US AT: WWW.DAVINCIBABY.COM/PARTS OR YOU CAN CONTACT US BY MAIL: DAVINCI 8700 REX RD., PICO RIVERA, CA 90660 (323) 768-0183 www.davincibaby.com L’enregistrement de votre produit est plus facile que jamais. Veuillez l’enregistrer sur notre site Web à : www.davincibaby.
