Installation & Assembly

1
ASSEMBLY INSTRUCTIONS • INSTRUCTIONS D’ASSEMBLAGE
* The bolt may not be able to screw through the
barrel nuts smoothly. It is suggested to use a flat
screwdriver to stabilize and adjust the direction of the
barrel nut.
* Il est parfois difficile de visser correctement la vis dans
l’écrou. Vous pouvez utiliser un tournevis plat pour corri-
ger l’orientation de l’écrou cylindrique et l’immobiliser.
Flat Screwdriver
Tournevis plat
Please use an Allen wrench to screw the bolt with the
lock washer straight into the threaded nut until it is
tight.
À l’aide d’un clef Allen, vissez la vis avec une rondelle
de blocage dans la partie filetée de l’écrou et serrez.
Allen wrench
Clef Allen
3
Please follow the rest of the instruction steps in the instruction manual to
complete the assembly.
Veuillez suivre le reste des instructions du manuel pour terminer l’assemblage.
Do not overtighten the bolts.
Ne pas trop serrer les boulons.
(back)
(arrière)
B-2
(back)
(arrière)
I
H12
H13
H13
H13
H12
H12
H13
X4X3
H12
5