User manual

Installing the Daytime Fan Kit

8. Attach the three threaded spacers to the fan plate using the three #8-32 x

1/2'' screws and the three #8 washers and #8 lock washers included with

the kit.

Install Threaded Spacers

9. Detach the fan motor cable from the power cable assembly on the fan plate

and set the fan motor aside.

Detach Fan Motor Cable

10. Lower the Fan Plate onto the radiation shielding stack.

Fan Plate

Threaded

Spacer

(3)

#8 Flat Washer

#8 Split-Lock Washer

#8-32 x 1/2" Screw

Fan Plate

Fan Plug

Power Cable

Assembly

Fan Motor

Assembly