User's Manual

1
Welcome to EnviroMonitor Sensor Node
An EnviroMonitor System includes a Gateway and a number of Nodes that house up
to four sensors each. The Nodes transmit the sensor data to the Gateway, either
directly from Node to Gateway, or indirectly by “hopping” from Node to Node to
Gateway via mesh network operating at 900 MHz (different in the EU). The
Gateway then sends the data via cellular connection to the Cloud.
EnviroMonitor can be customized for any size installation. Each Gateway can
receive from as many as 50 Nodes. Additional Gateways can be added to your
system to receive from another set of Nodes.
Before installing sensors and sensor nodes, should first set up and activate your
EnviroMonitor Gateway.
You should have already downloaded the EnviroMonitor Mobilize Setup app on the
smartphone you will use while setting up the nodes. Install the Mobilize Setup App
on your Smartphone. Scan the applicable QR code below or search for Mobilize
Setup on iTunes or the Google Play Store.
Note: Cellular connection is not required for set up of the nodes. If cellular connection is not
reliable where the Nodes will be installed, make sure to open the app before going out
to the site while still connected to the internet. This will ensure your app has the latest
information.
Mobilize Setup
iPhone App
Mobilize Setup
Android App
PLACEHOLDER