User's Manual

6
example, if you plan to mount the node on a tower, you will want to install the
sensor first.
1. Install the sensor in the into the sensing medium per the manufacturer’s
instructions and the needs of the environment, making sure the sensor is
installed within cable reach of the Node.
2. Wire the sensor into one of the 6-wire sensor connectors. Each sensor has
specific wiring specifications. In the app, find the sensor on the Sensor
Junction Wiring Diagram to determine how it should be wired to the junction.
Note: If the sensor has a RJ-jack on its cable, remove it and strip the wires.
3. Using a small flathead screwdriver,
loosen the appropriate screws and insert
the bare wires.
CAUTION: Do not let bare wires touch each other.
4. Tighten the screws.
5. Plug the sensor junction into the sensor port indicated by the app.
6. Run the sensor cable down and out of the box through the bottom. Make sure
it will be enclosed by the foam when the shelter door is closed.
1
5