User Manual

Troubleshooting Wireless ISS Reception

Transmitter ID DIP Switches in Top-right Corner of SIM

To change to another ID, use a ballpoint pen or paper clip to toggle DIP switches

#1, 2, and 3. The settings for Transmitter IDs 1 - 8 are shown in the table below.

Set the Vantage Pro2 console to the same ID as the transmitters, as described in the

Vantage Pro2 Console Manual.

Using Multiple Transmitting Stations

This table shows the maximum number of each type of station that can be

used with a single Vantage Pro2 console.

The console can receive signals

from a total of up to eight transmitters (stations).

*Replaces the ISS anemometer.

**Two are allowable only if both stations are only partially populated. For exam-

ple, a network can either have both a Leaf Wetness/Temperature station and a Soil

Moisture/Temperature station, or it can have one combined Leaf Wetness and Soil

Moisture/Temperature station.

ID CODE SWITCH 1SWITCH 2SWITCH 3

#1 (default) off off off

#2 off off ON

#3 off ON off

#4 off ON ON

#5 ON off off

#6 ON off ON

#7 ON ON off

#8 ON ON ON

Station Type Maximum Number

Integrated Sensor Suite (ISS) 1

Anemometer Transmitter Kit* 1

Leaf & Soil Moisture/Temperature Station 2**

Temperature Station 8

Temperature/Humidity Station 8

1234

DIP Switches