Instruction Manual (8246) Instruction Manual

Installing CarChip in a Vehicle

The OBDII port will be located within 3 feet of the steering wheel within or

near the general area indicated by the dotted line in the illustration below. The

port should be easily accessible to a person in the driver's seat.

If you have trouble finding the OBDII port, check the following areas:

• Under the dash

• In front of the passenger seat

• Behind the ash tray

• Behind a small access panel in the dash

• In or around the center console

2. Plug CarChip into the OBDII port checking to make sure the indicator light

blinks when first connected.

Note: If the indicator light is enabled, which is its default setting, it continuously blinks when

connected to a vehicle. If the indicator is disabled, it stops blinking once is has

established communication with the OBDII computer.

OBD II Port

OBD II

Connector

CarChip

Fleet Pro

Data Logger