GPS/Wireless System Installation Manual Includes: GPS/Wireless Interface Module (#8127) GPS Module (#8128) Wireless On-Board Module (#8129)
Regulatory Compliance E Mark This product complies with the essential protection requirements of the EC EMC Vehicle Directive 95/54/EC. CE EC EMC Compliance This product complies with the essential protection requirements of the EC EMC Directive 89/336/EC. FCC Part 15.247 FCC ID: OUR-XBEEPRO IC RSS-210 IC ID: 4214A-XBEEPRO FCC Part 15 Class B Registration Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
GPS/Wireless System Installation Manual This manual provides the instructions necessary to install the DriveRight GPS/ Wireless Interface Module (#8127), GPS Module (#8128), and the Wireless On-Board Module (#8129) with your DriveRight 600 or 600E device. Refer to the DriveRight 600 User’s Guide or the DriveRight 600E User’s Guide, and the DriveRight Fleet Management Software Online Help for instructions on how to configure and use the components in the GPS/Wireless System.
Components and Mounting Hardware Components and Mounting Hardware The following mounting hardware kit is included with GPS/Wireless Interface Module (#8127) and can be used with all three components: ® Velcro Tape (6 pair) 5.
Components and Mounting Hardware The GPS Module (#8128) is sold separately and comes with the component shown below: GPS Module (#8128) The Wireless On-Board Module (#8129) is also sold separately and comes with the component shown below: Wireless On-Board Module (#8129) 3
GPS/Wireless System Wiring Diagram GPS/Wireless System Wiring Diagram Wiring the GPS/Wireless System with a DriveRight 600E 4 GPS Module #8128 GPS/Wireless Interface Module #8127 Digital Adapter Cable GPS W 8′ Cable (244 cm) Wireless On-Board Module #8129 SmartCard On-Board Reader #8104 or #8105 (optional) DriveRight 600E #8126 The following wiring diagrams display all the possible wiring solutions for connecting the GPS/Wireless Interface Module, GPS Module, and Wireless On-Board Module to an
GPS Antenna Digital Adapter Cable 07381.129 (sold separately) Required if #8157 is installed GPS/Wireless Interface Module #8127 GPS Module #8157 (optional) Requires 07381.
GPS/Wireless System Wiring Diagram Note: If installing the GPS/Wireless System with a DriveRight 600, use an #8157 GPS Module instead of the #8128 GPS Module and connect it to the GPS Wireless Interface Module as shown on the previous page. Make sure to plug part #07381.129 (sold separately) into the connector labeled “GPS” on the GPS/Wireless Interface Module. If connecting the GPS/Wireless System to a DriveRight 600 without a GPS Module present, the plug is not needed as part of the installation.
GPS/Wireless System Wiring Diagram See the diagrams below for help on disconnecting and connecting the cables properly: Disconnecting Cables: Hold both cables by their connector housing and pull apart. The housing of the male connector slides to separate the cables. Connecting Cables: Slide Connector Housing Hold the female connector and push the male connector from behind the housing, allowing the housing to slide back. The cables lock together when a connection is made.
GPS/Wireless System Wiring Diagram Installing the GPS/Wireless System See the installation diagram below for correct placement and installation of all the components in the GPS/Wireless System into a vehicle: Wireless On-Board Module #8129 Cable must enter unit from the top GPS Module #8128 Situated line-of-sight to the sky GPS/Wireless Interface Module #8127 Note: If using a DriveRight 600 with a #8157 GPS Module, place the #8157 GPS antenna in the same location as the #8128 GPS Module shown in the dra
GPS/Wireless System Wiring Diagram 3. Mount the GPS Module on top of the dashboard. Special requirements that should be taken into account when mounting the GPS Module are: • Locate the module so that it has a clear view of the sky. Any metal obstructions may interfere with satellite reception. Davis recommends placing the GPS Module on the deep left corner of the dashboard. See the graphic on the previous page for more information.
Wireless Download System Overview Wireless Download System Overview The DriveRight Wireless Download System includes three products. These products work together to give your DriveRight fleet the ability to download data directly from the DriveRight devices to the FMS database in the fleet office, without any actions by your fleet drivers. With this system, there is no need for the drivers to carry the DriveRight device or SmartCard into the fleet office.
USB Port Base Station for Wireless Download System #8130 Configuration Cable for Wireless On-Board Module #8131 8129s installed in your fleet communicate with 8130 Base Station Wireless On-Board Module #8129 (connected to PC for configuration before installation) Wireless Download System Overview Wireless Download System Network Set Up The following diagram is of a sample Wireless Download System network.
Product Specifications Product Specifications For the GPS\Wireless Interface Module (#8127) Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.25'' x 2.00'' x 1.00'' (97 mm x 61 mm x 23 mm) Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 oz (0.3 kg) Operating Range . . . . . . . . . . . . . . . . . . . . -40°F to +176°F (-40°C to +80°C) Storage Range . . . . . . . . . . . . . . . . . . . . . . -40°F to +185°F (-40°C to +85°C) Input Power . . . . . . . . . . . . . . . . . .
Product Specifications For the Wireless On-Board Module (#8129) Size (l x w x h) . . . . . . . . . . . . . . . . . . . . . . 2.50'' x 1.75'' x 0.83'' (64 mm x 45 mm x 21 mm) Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.0 oz (0.113 kg) Operating Range . . . . . . . . . . . . . . . . . . . . -40°F to +176°F (-40°C to +80°C) Storage Range . . . . . . . . . . . . . . . . . . . . . . -40°F to +194°F (-40°C to +90°C) Input Power . . . . . . . . . . . . . . . . . . . . . . . . 3.
Contacting Davis Technical Support Contacting Davis Technical Support If you have questions or encounter problems installing or operating your GPS\Wireless Interface Module, GPS Module, or Wireless On-Board Module, please contact Davis Technical Support. Note: Please do not return items to the factory for repair without prior authorization. Phone Support (510) 732-7814 – Monday - Friday, 7:00 a.m. - 5:30 p.m. Pacific Time. (510) 670-0589 – Fax to Technical Support. E-mail Support support@davisnet.
