Installation guide

Page 8

Use this ﬂow chart to determine the optimum dip switch set-

ting.

NOTE:

You will need to test drive the vehicle and observe the green test

LED which is enabled using switch 4. 0 (zero) means the switch

is off and 1 means the switch is on. The DriveRIght unit must

be plugged in for the LED to indicate.

0 = OFF

1 = ON

Set

1 2 3 4

0 1 0 1

Drive 2 mph.

Green LED flashing

or dimmed?

Drive 2 mph.

Green LED flashing

or dimmed?

Yes No

Set

1 2 3 4

1 0 1 1

Turn Test LED Off (SW4)

and you are done.

Set

1 2 3 4

1 1 0 1

VSS not

working.

See

Trouble-

shooting.

NoYes

Drive 2 mph.

Green LED flashing

or dimmed?