Installation manual

Using the Rainfall Function Page 13

To Clear Rainfall

Daily and total rainfall are independent of each other. You must clear each reg-

ister separately.

1. Press RAIN once or twice to select daily or total rainfall, as desired.

2. Press CLEAR and hold it down.

The display will ﬂash several times and then the weather station clears rain-

fall.

DAILY RAINFALL CLEARED

Note:Performing a “total clear” on the weather station does not clear rainfall.

To Set Total Rainfall

You may enter a total rainfall amount to represent any rainfall which accumu-

lated before you obtained the Rain Collector II.

1. Press RAIN once or twice to select total rainfall.

2. Use ENTER to set the total rainfall amount

See “Using the Enter Key” in the weather station manual.