Getting Started Guide Owner manual

Serial Port Connection

1. Locate a free serial port on the back of your computer and connect

the blue DB-9 adapter to the port, then connect the the 8’ cable to

the adapter.

2. Plug the short cable coming from the data logger into the 8' cable.

The connection between the Envoy8X and the computer can be

extended up to 40' (12 m) using a Davis Standard 4-Conductor

Cable, product number 07876-040.

Note: Do not attempt to use more than 40' of extension cable, or the data logger

may have difficulty communicating with the compute. Warning: Do not use

phone cable. Our cable looks like a phone cable, but it is wired differently.

Note: The data logger does not require a constant connection with a computer to

continue logging and storing data. Although the data logger should remain

connected to the Envoy8X at all times, the data logger only needs to be con-

nected to the computer when data is being downloaded or when the com-

puter is actively using data from the data logger. The data logger and

Envoy8X can be disconnected from the computer if the Envoy8X is placed

in a location where the data logger cable cannot reach.

9-Pin

Adapter

(Blue DB-9)

Optional 40' (12 m) 4-Conductor

Extension Cable (Davis p/n 07876-040)

and Coupler

8' (2.5 m) Cable

AC Power

Adapter