Installation manual

System Installation

Page 10 Industrial System Installation Manual

ISPLAYING

THE

ONSOLE

By changing the orientation of the mounting base, you may display the console

on a tabletop, set it on a shelf, or mount it on a wall.

Selecting a Site for the Console

Unless you use Davis’ Complete System Shelter or a similar weather-proof

shelter, you should locate the console indoors. For more accurate readings, fol-

low these suggestions.

✦

Avoid placing the console in direct sunlight.

The black casing heats up in direct sunlight. This may cause erroneous

readings and/or damage to the unit.

✦

Avoid placing the console near radiant heaters or heating/air conditioning ducts.

✦

If you are mounting the console on a wall, choose an inner or interior wall.

Avoid walls which heat up or cool down depending on the weather.

✦ To connect the console to an 8-conductor cable running inside the wall, attach the

mounting base to an empty switch box, using the two screw holes on the mount-

ing base.

“Horizontal” Orientation

Use this mounting base orientation if the console’s LCD will be below eye level

once the console is positioned. Attach the mounting base as shown below and

then place the console onto any ﬂat surface.

HORIZONTAL ORIENTATION