Instruction Manual

Page 2 Wireless Leaf & Soil Moisture/ Temperature Sta-
Tools for Setup
In addition to the components shown, you will need some or all of the follow-
ing materials:
• Adjustable wrench or 7/16" wrench
• Medium Phillips Screwdriver
• Ballpoint pen or paper clip (small pointed object of some kind)
• Drill and 3/16" (5 mm) drill bit (if mounting on a vertical surface)
• Stepped Sensor Installation Tool for Soil Moisture and Temperature Sen-
sors (recommened, see page 17)
Components
The Leaf/Soil Station includes the following components and hardware:
Optional Sensors
The following optional sensors are available for the Leaf/Soil Station:
Shelter
3-Volt Lithium
Battery
8" Cable Ties
4" Cable Ties
1/4" x 1-1/2"
Lag Screws
U-Bolts
1/4" Flat Washers
1/4" Lock Washers
1/4" Hex Nuts
Leaf/Soil Station Components
#8 Wood Screws
U-Bolts
1/4" Flat
Washers
1/4" Hex Nuts
Leaf Wetness Sensor
with 40' (12.2 m) of cable
#8 x 3/4"
Machine
Screws
#8 Hex Nuts
#8 Lock Washers
#8 Flat Washers
Optional Leaf Wetness Sensor (#6420)