Manual

Multi-Purpose Shelter
8
Runanygroundjumpersfromyoursystemcomponents tothegroundlugand
attachusingtheother#10washer,lockwasher,andhexnutasshownbelow.
ATTACHING GROUND JUMPERS TO GROUND LUG
GroundtheMPSusingtheprovidedgroundwire.Ifyouanticipateheavy
surges,youmaywishtouseaheavierwireormultiplewires.Cuttheground
wiretothelengthrequiredtoreachfromtheMPStoasuitableground..The
groundwireshouldbeasshortaspossible.Stripbothen
dsofthegroundwire
(removethespadelugifnecessary)andinsertoneendintothegroundlug.
Secureinplacebytighteningthegroundlugscrew.Attachtheotherendtoa
suitableground.
GROUNDING THE MPS