Specifications

Sensor Mounting Shelf
For mounting Vantage Pro2 solar radiation and/or UV sensors. Rigid
shelf with anodized aluminum posts and stainless steel hardware
attaches easily next to the rain collector on the outside of the inte-
grated sensor suite.
6673 Sensor Mounting Shelf $30
Call toll-free 1-800-678-3669 7
VANTAGE PRO2 OPTIONS
Daytime Fan-Aspirated Radiation Shield Kit
An economical solution for adding the benefits of fan aspiration to
your wireless or cabled Vantage Pro2 or Pro2 Plus. Half the cost of
our 24-hour fan-aspirated radiation shield, but nearly 75% as effec-
tive in reducing the effects of daytime radiation. Solar-powered fan
runs during the day. Since there is no backup battery, the fan will
cease running when night falls and the effects of radiation are less.
Kit includes fan, solar panel, additional radiation shield plates, and
hardware, as shown in inset photo. Larger photo shows the kit as
installed on a wireless Vantage Pro2. Note that this kit is not com-
patible with our original Vantage Pro stations.
7747 Daytime Fan-Aspirated Radiation Shield Kit $135
Anemometer Transmitter Kit
Solar-powered kit for use with wireless Vantage Pro2 or Pro2 Plus.
Allows you to mount the anemometer in a different location than the
rain collector and the rest of the integrated sensor suite, up to 1000'
(300 m) from the console/receiver. For longer distances, add one or
more wireless repeaters. Kit includes transmitter inside weather-resistant
shelter, solar panel, battery, and mounting hardware.
6332 Anemometer Transmitter Kit $195
Solar Radiation Sensor
To measure solar radiation and solar energy. Diffuser
element and housing are carefully designed for accu-
rate cosine response. Silicon photo diode provides
good match to solar spectrum. Two-piece housing
minimizes radiation heating, allows convection cool-
ing of the sensor, and prevents the trapping of water
or dust. To mount next to a rain collector, add our Sensor Mounting
Shelf (not included).
6450 Solar Radiation Sensor $160
Includes2'(0.6m)cable.UseStandard4-ConductorExtensionCable.Maximumcablelengthis125'(38m)from
sensor to integrated sensor suite.
7876-008Cable,8'(2.4m)$10 7876-040Cable,40'(12m)$18 7876-100Cable,100'(30m)$40
UV Sensor
Measures the sunburning portion of the UV spectrum.
Allows you to display UV index, dose rate, and daily and
accumulated dose. Multi-layer filter provides a spec-
tral response that closely matches the Erythema Action
Spectrum. Diffuser provides excellent cosine response.
Two-piece housing minimizes radiation heating, allows convection cool-
ing of the sensor, and prevents the trapping of water or dust. To mount
next to a rain collector, add our Sensor Mounting Shelf (not included).
6490 UV Sensor $350
Includes2'(0.6m)cable.(Whensoldpre-installedonaVantagePro2Plus,includes3'(0.9m)cable.)UseStandard
4-ConductorExtensionCable.Maximumcablelengthis125'(38m)fromsensortointegratedsensorsuite.
7876-008Cable,8'(2.4m)$10 7876-040Cable,40'(12m)$18 7876-100Cable,100'(30m)$40
Attaches easily
to the outside
of the Vantage
Pro2 integrated
sensor suite.