Specifications

8 Davis Instruments
VANTAGE PRO2 OPTIONS
Or mount it on a wall.
Use the console on a desk or at a table.
Customize your installation.
40' (12 m) Anemometer Cable
All Vantage Pro2 stations, whether wireless
or cabled, include a cable that lets you mount
the anemometer and rain collector up to 40'
(12 m) apart. When the cable is not needed,
simply lash the coil out of the way on your
mounting pole. Hardware for mounting on a
pole or post is included; mounting pole is not.
Cable may be extended using optional exten-
sion cables. See page 20.
Included with Vantage Pro2 and Pro2 Plus
Mounting Pole Kit
Optional Mounting Pole Kit includes two gal-
vanized steel poles, connector, and mounting
hardware. Poles measure 19½" (0.50 m) and
21" (0.53 m) long. Assemble the two together
to make a single 37½" (0.95 m) long pole.
Outside diameter is 1
5
/16" (33 mm).
7717 Mounting Pole Kit $35
Mounting Tripod
Optional tripod makes installation even easier.
Brackets at the base of legs tilt to mount on
roof or uneven terrain. Made of galvanized
steel. Includes two 36
3
/8" (0.92 m)-long poles,
which may be used separately or together to
make a single 69¾" (1.77 m)-long pole.
7716 Mounting Tripod $75
Add another console, and get
the weather report wherever
you are—indoors or out.
Vantage Pro2 Console/Receiver
To view data from a wireless Vantage Pro2 station
in additional locations, or for use with any of the
special-purpose wireless stations shown on
the previous pages. Receive data
directly from the outdoor sensors
or use as a repeater, retransmit-
ting the data from one console/
receiver to another. Includes all the
features shown on pages 2-3.
6312 Vantage Pro2 Console/Receiver $295
Switch between
metric and U.S.
units of measure
at the push of a
button!