User`s guide

T
ECHNICAL
R
EFERENCE
Command Line Options
100
▲ V1
Sets the result code to verbal mode.
▲ &H1
Sets the modem for hardware flow control. Note that not all modems support
hardware flow control.
C
OMMAND
L
INE
O
PTIONS
The following command line options allow you to perform specific program func-
tions as the program loads (such as downloading, clearing highs/lows, or open-
ing a specific station. In order to use a command line option, open the Properties
dialog box for the program icon (consult your Windows documentation for
instructions) and enter the command line options after PCLINK.EXE.
▲ Station Directory -o
If you have multiple stations, when the software loads, it also opens the sta-
tion in the station directory specified.
▲ Station Directory -d
When the software loads, it will automatically download data from the station
in the station directory specified.
▲ Station Directory -c
When the software loads, it will automatically clear data from the station in
the station directory specified. If you have only one station, you do not need to
specify the station directory.
▲ Station Directory -p
Some printers can not print the plot axis labels vertically. We have seen this
on a HP IIP printer at 150 dpi. If you have a printer that is doing this, you can
use this command line option to force the printer to print the axis labels out so
you can read them. This applies to Plots and Strip Charts.
Examples:
▲ PCLINK.EXE Official -o
After loading the software, opens the station contained in the sub-directory
entitled “Official.”
▲ PCLINK.EXE Official -d -c
After loading the software, downloads and clears information from the station
contained in the sub-directory entitled “Official.”