Manual

Page 10 Solar Power Kit
Attaching the Solar Panel to the Mounting Bracket
The solar panel is designed to pivot on the 5/16” screws.
1. Loosely attach the 5/16-18 x 33
33
//
//
44
44
” (2 cm) screws, two 5/16” flat washers, two 5/16” split
lock washers, and two 5/16” stainless steel hex nuts to the mounting bracket as shown
below.
Do not tighten completely.
2. Slide the heads of the 5/16-18 x 33
33
//
//
44
44
” (2 cm) screws into the channel on the sides of the
panel as shown below.
Slide the screw heads up the channel until they are at the middle of the
panel.
ATTACHING MOUNTING BRACKET TO PANEL