Manual

Page 12 Solar Power Kit
CONNECTING TO THE REGULATOR
Follow the instructions below to connect the solar panel, battery, and console to
the regulator circuit.
Connecting the Solar Panel and Battery to the Regulator Circuit
1. Route the cable from the solar panel to the regulator circuit and connect to plug B1.
If you have mounted the regulator circuit in the Complete System Shelter
(CSS), you will need to route the solar panel cable into the CSS through the
cable boot in the base of the shelter as shown below.
2. Route the cable from the battery to the regulator circuit and connect to plug B2.
CONNECTING CABLES TO THE REGULATOR CIRCUIT
3. Use a voltmeter to check the battery voltage appearing on the battery test points on
the regulator circuit.
See “Test Points” on page 13.