Instruction manual

Tools and Materials Required Page 5
T
OOLS AND
M
ATERIALS
R
EQUIRED
In addition to the components listed above, you may need some of the follow-
ing tools and materials. Please be sure you have everything you need before
beginning the installation.
✦
3/4" Galvanized Pipe or Antenna Mast, maximum outside diameter of 1-1/4"
(32 mm)
This pipe/mast is required to mount the directional (Yagi) antenna and
may be used in conjunction with the Antenna Mast-Mount Kit to mount
the omni-directional antenna above the Sensor Mounting Arm.
✦
Phillips Screw Driver
✦
Slotted Screw Driver
✦
Electric Drill with 7/32" (5.5 mm) 3/16" (4.8 mm) drill bit
✦
Adjustable Wrench or Socket Set