Specifications
Davis Instruments 13
Includes all the features of the Vantage Pro2 and Pro2 Plus integrated sensor suites shown on page 7.
Can transmit to Vantage Vue and Vantage Pro2 consoles, Weather Envoy, Envoy8X and Vantage Connect.
Mounting pole not included.
6322 with Standard Radiation Shield
6323 with 24-Hour Fan-Aspirated Radiation Shield
Because Vantage Vue’s transmitters are radio-
compatible with Vantage Pro2, you can mix and
match components. Can transmit to Vantage Vue,
wireless Vantage Pro2 consoles, wireless Weather
Envoy, Envoy8X and Vantage Connect. Mounting
pole not included.
6322C with Standard Radiation Shield
6327 with Standard Radiation Shield
6328 with 24-Hour Fan-Aspirated Radiation
Shield
6327C with Standard Radiation Shield
Both Vantage Vue and
Vantage Pro2 integrated
sensor suite can be used with
Weather Envoy, Envoy8X
and Vantage Connect and
WeatherLink (see page 20).
®
Add special-purpose stations or sensors.
Customize your Vantage Pro2 weather station, Weather Envoy or Envoy8X by adding
special-purpose stations and sensors. Each can receive data from up to eight different
transmitting stations.
Battery-powered station includes stainless steel temperature probe
with 25 ft. (7.6 m) cable, transmitter and battery inside weather-
resistant shelter, and mounting hardware. To view the data, add a
wireless Vantage Pro2 console/receiver, Weather Envoy or Envoy8X
and WeatherLink. Expected battery life is six to nine months.
Battery-powered station includes
temperature and humidity sensors
inside protective
radiation shield,
and transmitter
and lithium
battery inside
weather-resistant
shelter. Expected
battery life is six to nine months.
To view the data, add a wireless
Vantage Pro2 console/receiver,
Weather Envoy or Envoy8X and
WeatherLink. Includes hardware
for mounting on fence post or pole.
Mounting pole is not included.
Solar-powered station includes transmitter and backup battery inside weather-
resistant shelter. To view the data for up to eight stations, add an Envoy8X
and WeatherLink (see chart on page 11). Vantage Pro2 console/receiver or
Weather Envoy and WeatherLink can only receive data from either:
• Asinglefullypopulatedstationwithtwoleafwetnesssensors,foursoil
moisture sensors, and four temperature probes,
Or
• Twopartiallypopulatedstations,onewithtwoleafwetnesssensorsand
two temperature probes, and the other with four soil moisture sensors and
four temperature probes.
Available in two models. Choose the model without sensors (6345),
and add only those you need to meet your requirements. Or choose the
Complete Soil Moisture/Temperature Station (6345CS), and add one or two
leaf wetness sensors as desired. Compatible with the 6470 Stainless Steel
Temperature Probe with Two-Wire Termination.
without sensors
with 4 soil
moisture sensors and 4 temperature probes
®
With Vantage
Pro2, this
solar-powered
kit allows you
to mount the
anemometer in a different
location than the integrated sensor
suite—up to 1,000 ft. (300m)
from your wireless console/receiver.
With Envoy8X, you can use this kit
with any of our sensors including
solar radiation, UV, temperature,
anemometer, rain and third-party
sensors that report in a range of
0–3 volts. For longer distances,
add one or more wireless repeaters.
Includes weather-resistant shelter for
transmitter, solar panel, battery, and
mounting hardware.