Specifications
Davis Instruments 17
7876-008 Standard 4-Conductor, 8' (2.4 m)
7876-040 Standard 4-Conductor, 40' (12 m)
7876-100 Standard 4-Conductor, 100' (30 m)
7876-200 Standard 4-Conductor, 200' (61 m)
7895-050 Shielded 4-Conductor, 50' (15 m)
7895-100 Shielded 4-Conductor, 100' (30 m)
Wireless Vantage Pro2 40' (12 m) For Anemometer to Integrated Sensor Suite, see note above.
Cabled Vantage Pro2
40' (12 m) For Anemometer to Integrated Sensor Suite, see note above.
100' (30 m)
1000' (300 m) from console to Integrated Sensor Suite.
(See descriptions above.)
WeatherLink for Vantage Pro2 8' (2.5 m)
48' (14.6 m) from data logger to serial port. (Serial port
versions only.)
Solar Radiation Sensor 2' (0.6 m) 125' (38 m) from sensor to Integrated Sensor Suite.
UV Sensor 2' (0.6 m) 125' (38 m) from sensor to Integrated Sensor Suite.
Stainless Steel Temperature
Probe with Two-Wire Termination
15' (4.6 m)
800' (242 m) from probe to Wireless Leaf & Soil Moisture/
Temperature Station.
Stainless Steel Temperature
Probe with RJ Connector
25' (7.6 m)
200' (61 m) from probe to Weather Envoy, Envoy8X, or
Anemometer/Sensor Transmitter Kit.
Temperature Probe with RJ
Connector
25' (7.6 m)
200' (61 m) from probe to Weather Envoy, Envoy8X, or
Anemometer/Sensor Transmitter Kit.
Leaf Wetness Sensor 40' (12 m)
200' (61 m) from sensor to Wireless Leaf & Soil Moisture/
Temperature Station.
Soil Moisture Sensor 15' (4.6 m)
1000' (300 m) from sensor to Wireless Leaf & Soil Moisture/
Temperature Station.
Anemometer 40' (12 m)
240' (73 m) from sensor to Integrated Sensor Suite or
Anemometer/Sensor Transmitter Kit. See note above.
Rain Collector 40' (12 m)
900' (270 m) from collector to Anemometer/Sensor
Transmitter Kit.
Rain Collector Heater 50' (15 m)
120' (36 m) from power unit to AC-power adapter. Requires
terminal block.
ISS
Console/Receiver
transmItter KIt
ISS Console/Receiver
AnemometerAnemometer/Sensor
Transmitter Kit
remOte anemOmeter
ISS
Console
Anemometer
AC Power
Adapter
Our standard 4-conductor
cable includes waterproof
coupler kits for joining
two cables together,
indoors or out. You can
also join all our cables
using surge protectors.
The extension cables listed are for the serial port
versions of WeatherLink only. USB extension cables
are not available from Davis Instruments and must
be purchased from a computer supplier.
Maximum wind speed reading decreases as length
of cable from anemometer to integrated sensor suite
(for Vantage Pro2) or console increases. At 140'
(42 m), maximum speed is 135 mph (60 m/s). At
240' (73 m), maximum is 100 mph (45 m/s).
Temperature/Humidity Station
Console/receivers
Soil Moisture/
Temperature
Station
Leaf & Soil Moisture/
Temperature Station
Anemometer/Sensor
Transmitter Kit
ISS
Integrated sensor suite
Wireless
console/receiver
in complete
system shelter
Solar power kit
Temperature
probes
Soil
moisture
sensors
Leaf & Soil
Moisture/
Temperature
Station
For upgraded electrical circuit protection,
use 2 surge protectors with each of our
4-conductor cables.
Weather-resistant shelter houses two
surge protectors (sold separately).
(TOTAL # OF STATIONS CANNOT EXCEED 8)
Integrated Sensor Suite 1 1 1
Anemometer/Sensor
Transmitter Kit
1 0 1
Leaf & Soil Moisture/
Temperature Station
2* 0 2*
Temperature Station 8 0 3**
Temperature/Humidity
Station
8 0 2**
* One fully-populated station or two partially-
populated stations.
** WeatherLink will log a maximum of A) 3
Temperature Stations or B) 2 Temperature Stations
and 1 Temperature/Humidity Station or C) 1
Temperature Station and 2 Temperature/Humidity
Stations.