User Manual

Page 6 Fan-Aspirated Radiation Shield
2. Verify that the rain sensor cable is plugged into the receptacle labeled
“RAIN” on the SIM.
3. If you have a Vantage Pro Plus, verify that the UV and solar radiation sen-
sors are plugged into the SIM.
Connecting Anemometer to SIM
Refer to this section in your ISS Installation Manual.
Cabled Vantage Pro: Powering the ISS and Testing Communication
with the Console
Refer to this section in your ISS Installation Manual.
Wireless Vantage Pro: Powering the ISS and Testing Communica-
tion with the Console
Refer to this section in your ISS Installation Manual.
3-Volt
Lithium Battery
(
wireless models only)
C
onsole Cable
b
led models only)
Transmitter ID Switches
Anemometer Cable
UV Sensor Cable
Solar Radiation Cable
Rain Collector Cable (factory installed)
(factory
installed
on Pro Plus
models)
WIND RAIN SOLAR UV
Sensor Interface
Cable
SIM Power Cable
(wireless models only)
ISS SIM Connections