Instruction Manual

Preparing the ISS for Installation Page 5
Disassemble the Radiation Shield
1. Remove the three screws connecting the rain collector base from the
mounting bracket as shown below:.
Twist off the rain collector cone
Tipping bucket mechanism
Cut the plastic cable tie
Preparing the Rain collector
Rain Collector
Base
1" Screws (3)
Lock Washers
Flat Washers
Mounting Bracket
with Solar Panel
SOLAR MODELS
Mounting
Bracket
AC MODELS
Sensor
Cable
AC
Power
Cable
Sensor
Cable
SIM
Power
Cable
Radiation Shield
Remove Cardboard
Insert and Discard
Removing the Rain Collector Base
ISS Fan Rev B.fm Page 5 Thursday, November 14, 2002 4:29 PM