User's Manual

Daviscomms Confidential

3
Additional Info
2. Additional Info
2.1 BR828 Configurator
The user will receive the configurator software as a .zip file.
- Run the configurator setup file and follow the installation instructions.
If BR828 is used the configurator for the very first time, USB driver is needed to install.
- The user can find the Br828 configurator driver installation setup guide in the software package.
Br828 parameters can be programmed by “BR828 Configurator version X.XX”.
- Check the “ Help tap” in the configurator if the user needs help for BR828 configuration.
2.2 BR828 downloader
The downloader is used for BR828 software downloading.
-Connect BR828 to PC with USB cable.
-Run downloader software “ BR828 downloader version X.XX setup.exe.
- Press right soft key and Reset button
- The downloader will display “Device Connected”.
- Click “Browse” button and choose hex file to download.
- Click “Upgrade” to start the operation.
-After firmware is downloaded successfully to BR828, the downloader will display as below;
“ Firmware upgrading is completed successfully.”