User Manual

Menu - Configuration

Step.5 - In the Proxy Server menu > STATUS > select ENABLE.

Step.6 – In Proxy Server menu > REGISTRATION TIME > for eg:-

key in 3600 > select OK.

Step.7 - In the same SIP settings menu > OUTBOUND PROXY > IP ADDRESS >

for eg:- key in 192.168.2.1 > select OK.

Note: The outbound proxy server is the address and port that your phone uses to connect to a SIP

server, where there may be NAT routers that do not support the SIP protocol. If your SIP Service

Provider gave you an outbound proxy server address and port, then enter them here.

Step.8 - In OUTBOUND PROXY menu > STATUS > for eg:-

choose ENABLE and select it.

Note: This has to be enabled in order to make a SIP call.

Step.9 - In the same SIP settings menu > STUN SERVER > IP ADDRESS >

for eg:- key in stun.fwdnett.net > select OK.

Step.10 - In the STUN SERVER menu > STATUS > for eg:- choose ENABLE

and select it.

Fig.47 IP Address Screen

APPLY

CL EAR