User Guide

DaVoice Cell Phone Tripod Adapter Instructions

To rotate the clip, loosen the knob on the back of the adapter, and then tighten the knob once you

have it in the horizontal or vertical position. Insert your phone securely into the adapter (It is

spring loaded) You can also remove the clip from the stand by unscrewing the knob all the way

and use just the clip in either direction on your tripod.

PAGE 1
DaVoice Cell Phone Tripod Adapter Instructions To rotate the clip, loosen the knob on the back of the adapter, and then tighten the knob once you have it in the horizontal or vertical position. Insert your phone securely into the adapter (It is spring loaded) You can also remove the clip from the stand by unscrewing the knob all the way and use just the clip in either direction on your tripod.
PAGE 2
Bluetooth Remote Instructions Instructions to setup and use: 1. Insert battery and turn the switch "ON" the Bluetooth remote (battery may already be installed). 2. Turn Bluetooth "ON" in your device (Go to Settings > Bluetooth > On) 3. Then, while still in your Bluetooth screen on your device, CHOOSE “AB Shutter 3” (may temporarily say keyboard) in the devices that come up listed to pair it. This will make it connect.
PAGE 3