by Dawn Kitchen & Bath Products, Inc. 877-Dawn-USA · dp@dawnusa.net · www.dawnusa.net Installation Instructions Model: EK7861183 Single-Lever Pull Out Kitchen Faucet TABLE OF CONTENTS Preparation 2 Parts 2 Installation 3-4 Care and Cleaning 5 Warranty 5 Return Policy 5 Asking for Assistance 5 Please read all instructions carefully before starting the installation.
EK7861183 INSTALLATION INSTRUCTIONS PREPARATION ● Before You Begin Before installing any product by Dawn® in your home, make sure you are in compliance with all local plumbing codes. ● Check The Accessory Items Before installation, please check the condition of the product and, if appropriate, its components. If there is any problem with the product and/or its components, please contact the store you purchased it from for a replacement.
EK7861183 INSTALLATION INSTRUCTIONS INSTALLATION IMPORTANT: Recommended for professional installers only. The installer maintains responsibility for installing the product safely. ● ● ● ● The faucet main body is already assembled. Do not disassemble it. Thoroughly clean the inside of all pipes with a cloth before installation. Check all connections for leaks after installation. Water pressure range 0.05 Mpa to 1 Mpa; water temperature range 39°F to 194°F (4°C to 90°C).
EK7861183 INSTALLATION INSTRUCTIONS Remove the rubber washer (24), metal washer (25), and mounting nut (26) from the faucet. Insert the faucet through the faucet hole. From below the deck, assemble the mounting hardware back to the mounting shank. Tighten the mounting screws (27). Make a faucet hole. Make sure the mounting surface is clean and dry. On the handspray side of the hose, measure 15” down from the body of the faucet and make a mark. Install the hose weight at the mark.
CARE AND CLEANING To maintain the product and to avoid possible damage: 1. Clean as and when required. Regular cleaning prevents scale buildup and water spotting. 2. To clean, flush with clean water and dry with a soft cloth. 3. To remove scale or water spots, only use cleaners made specifically for that purpose. Apply cleaners to cleaning cloths, pads, or sponges first; do not apply directly onto the product. 4. Do not allow any cleaning product to remain on your faucet for longer than necessary. 5.
