Owner's Manual

DAWN HOUSE HEADBOARD INSTALLATION

With the help of an able-bodied assistant, place the headboard

carton on the oor in its desired location. Remove all tape and binding

straps, being careful not to puncture the box with any sharp objects.

Open the box and remove the plastic bag. Be sure to locate and set

aside any hardware.

Use the remote control to raise the head of the adjustable base all the

way. Unplug the power cord from the power source.

Align the headboard to the headboard mounting points on the frame.

Secure the headboard to the base with included screws. (At least two

screws are needed per mounting point.)

Feed the power cord through the hole in the headboard and plug it

into the power source.

STEP 1

STEP 2

STEP 3

STEP 4

STEP 5

STEP 6

CONTINUE WITH THE STEPS BELOW TO INSTALL YOUR DAWN HOUSE HEADBOARD.