Owner's Manual

PLACING THE BED INTO YOUR OWN FURNITURE

The Dawn House bed is slightly narrower than the standard bed frame

size and can work with most existing bed frames.

The bed is designed to rest on the oor, which will require the

removal of box springs or slats from your current frame.

EXCEPTIONS:

• Our bed should not be placed on slats or box springs

• Our bed may require legs (sold separately) to be compatible

with some 3rd party bed frames.*

• Underbed lighting and motion activated underbed lighting will be

hindered by 3rd party bed frames

• The Support Rail (sold separately) is incompatible with 3rd party

bed frames.

MEASURING: Smallest internal dimensions of the bed frame (with

the mattress support removed) should be no less than:

• Twin Long - 37.5" x 81"

• Full - 53.5" x 75"

• Queen - 59.5" x 81"

• King/Split King - 75" x 81"

Measurement tip: If your existing mattress will sit on the oor inside

of your current bedframe, then the Dawn House Bed should also t.

PLACING THE BED INTO YOUR OWN FURNITURE

IF YOU HAVE A HEADBOARD OF YOUR OWN, A UNIVERSAL HEADBOARD BRACKET CAN BE USED TO MOUNT

YOUR EXISTING HEADBOARD SAFELY AND SECURELY TO THE BASE. IF YOU HAVE AN EXISTING BED FRAME,

OUR BED MAY WORK; HOWEVER, SOME KEY FEATURES MAY BE INCOMPATIBLE.

* If your bed frame is taller than Dawn House bed, 3" legs are

offered (sold separately). Visit Dawnhouseliving.com to purchase.

WARNING: Placing the Dawn House bed inside of an existing

bed frame can cause pinch point and entrapment risks. Please

thoroughly consider the risks before using your own bed frame.