Owner's Manual

18
SYNCING TWO TWIN LONG BASES (OPTIONAL)
A SYNC CORD IS INCLUDED WITH THE BASE. NOT AVAILABLE ON QUEEN OR FULL SIZE BASES.
THE SYNC CORD CONNECTS THE TWO CONTROL BOXES TO SYNCHRONIZE THE MOVEMENT OF THE TWO
BASES. USE THIS FOR A KING SIZE MATTRESS ON TWO ADJACENT TWIN LONG BASES.
• If bases become mismatched, returning the bases to the at or
lowest position will re-sync the mechanical position.
• (Fig 1) The motion detector switch on both remotes needs to be in
the same position for normal operation.
The system is now linked. Pressing buttons on either remote
will control both bases simultaneously.
Unplug both bases from the power source.
Connect the Sync Cord to the same plug as the Puck Voice Control
but on the opposite side. It is located near the motion detector.
Plug bases back into the power source. Ensure that all cords are
securely attached.
STEP 1
STEP 2
STEP 3
PERFORMANCE NOTES
1