Installation & Assembly
2
ADA COMPLIANT UNDERMOUNT SINKS
INSTALLATION INSTRUCTIONS
PREPARATION
● Before You Begin
Before installing any Dawn product in your new or remodeled kitchen, you should make sure that you are in
compliance with all local plumbing codes.
● Check The Accessory Items
Before installaon, please check the condion of the product and, if appropriate, its components. If there is any
problem with the product and/or its components, please contact the store you purchased it from for a replacement.
As soon as you have inspected your product, please return it to its original packaging unl you are ready to install it.
● Handle With Care
Your stainless steel sink may be very heavy and may possibly require more than one person to li it. To protect its
nish and avoid damage before and aer installaon, please handle your sink with care. For care and cleaning ps
on Dawn Stainless Steel Sinks aer installaon, please refer to the Maintenance secon of this instrucon guide.
MATERIALS & TOOLS
Sink Template supplied by Dawn, Eye Protecon (Safety Glasses), Ear Protecon, Framing Square, Pencil
Silicone Adhesive Sealant, Stone Epoxy, Tape Measure, Jigsaw or Hacksaw and Blades, Rags, and Denatured Alcohol.
Other tools as needed.
Kitchen & Bath Products, Inc.
27688 Industrial Blvd., Hayward, CA 94545 • Toll-Free: 877-329-6872 • Fax: 510-723-0099 • dp@dawnusa.net • www.dawnusa.net
DIMENSIONS
ADAUS241607