SDS

95446855_PROF_NG - Dawn ProfessionalÒ Power Dissolver
Revision Date: 04-Oct-2016
TWA: 141 mg/m
3
Skin
2-Aminoethanol 141-43-5 TWA: 3 ppm
TWA: 7.5 mg/m
3
STEL: 6 ppm
STEL: 15 mg/m
3
TWA: 3 ppm
TWA: 7.5 mg/m
3
STEL: 6 ppm
STEL: 15 mg/m
3
TWA: 3 ppm
STEL: 6 ppm
TWA: 3 ppm
STEL: 6 ppm
No relevant exposure guidelines for other ingredients
Exposure controls
Engineering Measures Distribution, Workplace and Household Settings:
Ensure adequate ventilation
Product Manufacturing Plant (needed at Product-Producing Plant ONLY):
Where reasonably practicable this should be achieved by the use of local exhaust
ventilation and good general extraction
Personal Protective Equipment
Eye Protection Distribution, Workplace and Household Settings:
Requires Eye Protection
Product Manufacturing Plant (needed at Product-Producing Plant ONLY):
Wear safety glasses with side shields (or goggles)
If splashes are likely to occur, wear:
Tight sealing safety goggles
Hand Protection Distribution, Workplace and Household Settings:
Protective gloves
Product Manufacturing Plant (needed at Product-Producing Plant ONLY):
Protective gloves
Skin and Body Protection Distribution, Workplace and Household Settings:
Wear suitable protective clothing
Product Manufacturing Plant (needed at Product-Producing Plant ONLY):
Wear suitable protective clothing
Respiratory Protection Distribution, Workplace and Household Settings:
No special protective equipment required
Product Manufacturing Plant (needed at Product-Producing Plant ONLY):
In case of inadequate ventilation wear respiratory protection
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical State @20°C
Liquid
Appearance
opaque
Odor
Scented
Odor threshold
No information available
Property Values Note
pH value
13
Melting/freezing point
No information available
Boiling point/boiling range
No information available
Flash point
> 82 °C / > 180 °F
Evaporation rate
No information available
Page 4 / 8