SCOUTcombo Installation guide
Specifications Part Numbers 1013-108 8 port KVM Switch 1013-116 Cables & Accessories 2094-02PU USB & PS/2 Cable Set 1.8m 2094-03PU USB & PS/2 Cable Set 3.0m Package Contents 1013-108 9014-00A 5 v PSU Rackmount Brackets 16 port KVM Switch 2094-05PU USB & PS/2 Cable Set 5.0m 1013-116 9014-00A 5 v PSU Rackmount Brackets Physical Properties 8 Port 16 Port Height 4.5 cm 4.5 cm Width 44.0 cm 44.0 cm Operation and Storage parameters Operating Temperature: Storage Temperature: Humidity: Power Depth 15.
SCOUTcombo Introduction Thank you for purchasing the SCOUTcombo Switch. This product will ensure easy and accurate control over 8 to 16 Servers through a single console. The SCOUTcombo is compatible with USB style computers. The SCOUTcombo supports high resolutions of up to 2048 x 1536 without any deterioration of the image quality.
Keyboard Hot Key commands To send Hot Key commands to the SCOUTcombo switch, press and release Scroll Lock Scroll Lock within 5 seconds. Press a command key followed by Enter, for the desired effect. The following commands are supported: First Key Second Key Command Key Command Result Display‟s the OSD menu Switches to PC connected to port 1 Switches to the desired PC Auto-Scan mode ON Console Lock Changes Hot Key- Cycles through Scroll Lock, Caps Lock or Ctrl as Hot Keys.
The Administrator OSD st nd rd 1. KVM Layer No – 1 , 2 or 3 . 2. Cascaded channel number. 3. PC Name – User defined name (31 Characters) 4. Page Up / Page Down indicator (16 Port unit only) 5. PC Status a Buzzer On b Buzzer Off L Locked Port Computer Powered On Channel Scan Function On 6. Current Channel Number F1: Set up: basic set up menu F2: Scan: autoscan function Administrator’s OSD F3: Lock: setup lock/unlock, and available when F5 Security is set „ON‟ F4: Rename: rename selected port name.
F3: - Logout / Console Lock When the console is in locked mode, the push buttons and the console will lock. Pressing any key on the keyboard will present an unlock window. This will only accept the correct password. Note: If you forget your password, then there is no way in which to disable the security and the switch will need to be returned to Daxten. F4: - Rename. Allows you to rename the PC / Server name shown on the OSD menu and channel banner.
F6: - Lock Port This blocks all access to the locked server. An “L” with be displayed in the Status column of the OSD menu. The port can be unlocked by selecting F6 from the OSD menu and keying in the password. Port Lock Channel Banner (Single Switch) 1. Channel Number. (PC No). 2. PC name (Channel) Channel Banner (Cascaded Switches) 1. 2. 3. 4. st 1 Layer Channel Number. (PC No) nd 2 Layer Channel Number. (PC No). Channel Number. (PC No). PC name (Channel) Channel Banner (Scan Mode) 1. Scan Mode. 2.
SUN Combo keys The SCOUTcombo can emulate some of the special SUN keys to perform special functions in the SUN Operating System environment. So when the SCOUTcombo is connected to a SUN computer, the switch emulates these SUN keys using a set of key combinations called Combo keys. See the table below.
Service Information Technical Support If you cannot determine the nature of a problem, please call Daxten and ask for Technical Support. If possible, call from a phone located near the unit, as we may be able to solve your problem directly over the phone. If we cannot solve your problem, and determine that the fault is in the unit, we will issue a Return Material Authorisation (RMA) number that must appear on the outside of all returned products.
www.daxten.com Ireland Bay 21 Free Zone West Shannon, Co. Clare info.ie@daxten.com www.daxten.ie Tel: +353 (0) 61 23 4000 Fax: +353 (0) 61 23 4099 • Österreich Tenschert Str. 8 A-1230 Wien info.at@daxten.com www.daxten.at Tel: +43 (0)1 879 77 65 Fax: +43 (0)1 879 77 65 30 Worldwide info.eu@daxten.com www.daxten.eu • USA info.us@daxten.com www.daxten.us • Deutschland Salzufer 16, Geb. B 10587 Berlin info.de@daxten.com www.daxten.
