Installation guide

Keyboard Hot Key commands
To send Hot Key commands to the SCOUTcombo switch,
press and release Scroll Lock Scroll Lock within 5 seconds. Press a command key followed by
Enter, for the desired effect. The following commands are supported:
First Key
Second Key
Command Key
Command Result
Scroll Lock
Scroll Lock
Enter
Display‟s the OSD menu
Scroll Lock
Scroll Lock
1 Enter
Switches to PC connected to port 1
Scroll Lock
Scroll Lock
1 ……16 Enter
Switches to the desired PC
Scroll Lock
Scroll Lock
S Enter
Auto-Scan mode ON
Scroll Lock
Scroll Lock
H Enter
Console Lock
Scroll Lock
Scroll Lock
K Enter
Changes Hot Key- Cycles through
Scroll Lock, Caps Lock or Ctrl as
Hot Keys.
OSD menu
Press Scroll Lock Scroll Lock Enter , this
will display the OSD‟s Main Menu
The OSD Main Menu shows the channel
number, name, selected channel row
(highlighted), Servers that are powered on and
available (), Channels that are cascaded.
You can exit the OSD menu by pressing Esc
or Enter to leave the OSD to the selected
server.
You can use the  and  arrow keys to
highlight a computer, and Enter will select it
and leave the OSD.
Where a server is connected and powered on, the following symbol will appear  and the
corresponding front panel indicator will turn green.
When a channel is cascaded a  will appear to the left of the name.
When running the OSD on a cascaded switch, a number will appear in the top left corner of the OSD
menu (below the KVM layer number), indicating the parent port. E.g. 8 indicates that the switch is
cascaded on port 8. On a master switch this will remain blank.
User OSD