Installation guide

The Administrator OSD
1. KVM Layer No – 1
st
, 2
nd
or 3
rd
.
2. Cascaded channel number.
3. PC Name – User defined name (31
Characters)
4. Page Up / Page Down indicator (16 Port
unit only)
5. PC Status
a Buzzer On
b Buzzer Off
L Locked Port
Computer Powered On
Channel Scan Function On
6. Current Channel Number
F1: Set up: basic set up menu
F2: Scan: autoscan function
F3: Lock: setup lock/unlock, and available when F5 Security is set „ON‟
F4: Rename: rename selected port name.
F5: Security: security function and user priority setting
F6: Lock Port: PC port lock function (administrator only)
F1: - Setup Mode.
Use the up / down arrow keys to move through
the menu, and the left / right arrow keys to make
changes.
Scan Mode:
Select - Scan through selected channels “S” as
indicated on the main OSD menu in Status
column.
PC ON - Scan through all powered servers only.
Scan Time:
5 seconds (default) to 90 seconds in 5 second
increments.
Banner Time:
Sets the banner display time. – 5 seconds to 15 seconds in 5 second increments.
Position:
Menu - Allows you to set the position of the OSD menu, by using the arrow keys.
Banner - Allows you to set the position of the channel banner, by using the arrow keys.
Hotkey:
Allows selection of Hot Keys. Choices are Scroll Lock, Caps Lock or Ctrl
Sound:
Enable (ON) or disables (OFF) the internal buzzer.
Language:
Sets language of the OSD menu. Choices are: English (En), Deutsch (De) or Francais (Fr).
Note: Hot Keys can also be changed by the use of hot key command K.
e.g.: If the hot key is set to Scroll Lock, then Scroll Lock Scroll Lock K Enter will
make Caps Lock or Ctrl the hot key.
Administrator’s OSD
OSD Setup