User Manual

iLM8 – Live User Manual

Sample Rate: If Clock Source is set to internal, defines what sample rate frequency iLM8 - Live will

use.

(32.0, 44.1, 48.0, 88.2 or 96.0 kHz)

Audio Input Menu

Figure 9. Audio Input Menu Screen Display

NOTE: Unless your iLM8 - Live has the factory-installed HD/SDI I/O or Balanced Digital AES I/O

modules

installed, your screen will differ from that above.

Audio Source: Determines which set of physical inputs iLM8 - Live will use to receive audio. Only the

installed options will be available; only one input type may be used at a time:

• AES Inputs: Audio input is from the BNC AES input jacks. (Default)

• HD/SDI Inputs 1-8: Audio input is from the HD/SDI input jack, embedded audio channels 1-8

• HD/SDI Inputs 9-16: Audio input is from the HD/SDI input jack, embedded audio channels 9-16

• Balanced Digital: Audio input is from the Balanced Digital DB-25 I/O port

HD/SDI Mapping: Enters the HD/SDI mapping sub-menu to assign a custom channel configuration.

Will only be present if the HD/SDI I/O module is installed.

HD/SDI Mapping Menu

Figure 10. HD/SDI Mapping Menu Screen Display

For iLM8 - Live to make precise loudness measurements, the audio channel assignments need to be

properly maintained. If your HD/SDI audio channels are embedded in a non-linear assignment, iLM8 -

Live will need to be configured with the correct channel mappings.