User Manual

iLM8 – Live User Manual
39
5.0 Unit
Loudness Measure that is used for the 5.0 (surround) inputs.
5.0 Target
Target value set for the 5.0 inputs.
5.0 MM
Mix Monitor status for the 5.0 inputs.
5.0 Short (Avg.)
Short combined average for the 5.0 inputs.
5.0 Inf. Avg.
Combined infinite average of the 5.0 inputs.
5.0 Peak
Combined peak value of the 5.0 inputs.
5.0 L Short Avg.
Short average of the Left 5.0 input.
5.0 R Short Avg.
Short average of the Right 5.0 input.
5.0 C Short Avg
Short average of the center 5.0 input.
5.0 LFE Short (Avg.)
Short average of the LFE 5.0 input.
5.0 Ls Short Avg.
Short average of the Left Surround 5.0 input.
5.0 Rs Short Avg.
Short average of the Right Surround 5.0 input.
ST Unit
Loudness measure that is used for the ST (stereo) inputs.
ST Target
Target value set for the ST inputs.
ST MM
Mix Monitor status for the ST inputs.
ST Short Avg.
Short combined average for the ST inputs.
ST Inf. Avg.
Combined infinite average of the ST inputs.
ST Peak
Combined peak value of the ST inputs.
ST-L Short Avg.
Short average of the ST Left input
ST-R Short Avg.
Short average of the ST Right input
Device Faults
Any faults reported by the unit. Refer to the error code table.
Data-logging Field Legend
Error Codes
After the appropriate options have been set, press the APPLY button to save those settings and begin
communications with the iLM8 - Live. The program icon should change from red to green after
communication has been established with the unit, and the iLM8 - Live unit will illuminate the LOGGING
LED. Switch back to the Surround tab to view the program in operation. If a setting has been changed
in error, press CANCEL to revert all settings to their previously saved state.
0
No Faults
1:x
AES Lock Error
2:x
CRC Error
3:x
Validity Error
4:x
Bi-Phase Error
5:x
No Parity Error
6
No Clock Error
7
DSP Over Utilized
1
Left / Right
2
Center / LFE
3
L Sur / R Sur
4
ST-L / ST-R
Channel Code (for X)