User manual

12
iLM8 User Manual
Installation
Immediately upon receiving your iLM8, please make a careful inspection for any shipping damage. If
damage is found or suspected, please notify the carrier at once and then contact your dealer. iLM8 is
shipped in one carton, which contains: the iLM8 unit and an AC power cable.
We strongly encourage you to save the shipping carton and shipping materials supplied with your iLM8.
They are specially designed to properly protect your iLM8, and in the event that you need to return it for
service, only these OEM shipping materials can ensure its safe return to our factory.
We provide a limited 3-year warranty on all of our products; however, if you don’t register your unit, it is
impossible for us to contact you to notify you when important software upgrades become available.
Please take a few minutes to complete the warranty registration form on our website,
www.daysequerra.com.
Rack Mount Installation
The iLM8 chassis has four rack mounting holes and has been designed to fit in a standard 1RU space.
Plastic ‘finishing’ washers are recommended to protect the painted surface around the mounting holes.
Locate the air vents on each side of the unit, and be sure to keep them clear so the unit may have
adequate ventilation.
Power Connection
The AC power cable supplied with iLM8 must be connected from the IEC320 power entry module to an
AC mains outlet with a functional earth ground connection. For protection against electric shock and
electro-magnetic interference, do not plug the power cable into a ground lifting adapter or remove the
cable’s grounding pin. If in doubt, please consult a qualified electrician.
Please connect iLM8 to an uninterruptible power supply (UPS) to protect against power surges
and low-voltage conditions. iLM8 may be combined with other devices on the output of the UPS as
long as the total load is within the UPS’ capacity. Consult your UPS manual for details.
iLM8 will automatically power up when AC power is applied. If AC line power is lost or
momentarily interrupted, iLM8 will revert to its previous state.